This section contains LANC Remotes for use with selected Sony & Canon camcorders that have a LANC socket. Call us if you require advice.
They are very useful for controlling any recording you do with your ActionCamera as it allows you to start and stop filming at any time, without having to get the camcorder out of your bag. They save both tape and battery-life:
These LANC remotes are the smallest and easiest way to control recording via your bullet camera, and will fit any Sony or Canon camcorder with a LANC socket. They come in two types. Check with us if unsure.
- v1.4 controls recording in CAMERA and VCR mode for both Sony and Canon models. - v1.6 controls recording in VCR mode only and is recommended for Sony camcorders with a toggle type power switch. - v1.8 controls recording for certain Sony Hard disk and DVD camcorder models (NEW)
If you are using the PDR100, use this specially made remote control to easily and simply start and stop recording. Connects directly into the digital interface on the PDR100.
CamEye II makes it easy to start and stop recording, no more unnecessary film shots. A short click on the red button toggles between recording and standby. The bright feedback indicator shows the camera status and even tells you when it's time to replace the tape or recharge the battery.
When the cable controller is connected to the PV-500, Simply by sliding the switch on the cable controller, the PV-500 will power on itself and start to record.
This remote control, plugs into the top of the PV-700 & PV-800 and allows the user to remotely start and stop recording. This can be performed wirelessly with a range of 5-10 meters.
This LANC Toggle Switch can be used with any camcorder with a LANC socket (Sony & Canon): - On, switches your camcorder on and starts it recording through your bullet camera; - Off, stops recording and powers down your camcorder.
A two colour LED shows the status of the camcorder battery and tape.
Our power saver unit connect between your bullet camera power supply and your LANC remote/camcorder. When connected to a LANC remote, this unit powers off your bullet camera and camcorder together, thus saving you both camcorder and bullet camera batteries.
